Golden Vantage GV180136 Installation Manual

1 30" AND 36" WALL-MOUNT RANGE HOOD Universal Installation Instructions and Use & Care Guide For questions about features, operation/pe

Connect the hooks, gaskets and screws to the unit by screwdriver.Screw the anchor screws to suitable location, then hook on, lock screws.

10 Installation Cont.: 4. Connect the range hood to a designated standard outlet or cut off the plug and connect three wires (black, white an

11

12 Control Operation Control Panel Layout and Buttons configurations: A) Lamp:Press the lamp display one time to activate the light, press the

13  Check if the range hood has been plugged in, make sure that all power has been turned back ON, fused not blown and all electrical wiring are pr

14  Read and understand all instructions and warnings in this manual before operating the appliance. Save these instructions for future reference.

15  All inch measurements are converted from millimeters, thus inch measurements are estimated. Measurements and Diagrams 

16 Safety warning: Never put your hand into area housing the fan while the fan is operating! For optimal operation, clean range hood and all baffle/

17 LIMITED WARRANTY For three year from the date of purchase, when this major appliance is operated and maintained according to instructions attached

2 TABLE OF CONTENTS RANGE HOOD SAFETY ...2 INSTALLATIO

3 IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, READ THE FOLLOWING: Use this unit only

4 INSTALLATION REQUIREMENT TOOLS AND PARTS REQUIREMENTS Electrical drill or ratchet driver 1/2” drill bit for drilling pilot holes 1 ¼” drill bit f

5 INSTALLATION DIMENSIONS A. Countertop height B. Hood height from ceiling to bottom of the range hood filter surface: D-A-C=B C. 27” min. from

6 VENTILATION REQUIREMENTS Range hoods must be ventilated to the outdoors, except for non-vented (recirculating) installations. Do not ventilat

7 Calculating Vent System Length To calculate the length of the system you need, add the equivalent feet (meters) for all vent pieces used in the sy

8 Preparation Advanced Preparations:  Be Familiar with the controls of the range hood by reading through Range Hood Controls on Page, 12  Place t

9 Installation Installations: Measure the distance between the stove top and the bottom of the range hood. A distance of 27” to 30” is recommended.